SPECIAL TILES

The extrusion of ceramic pieces leads to obtaining singular designs of pieces. Faveton has a wide range of models and special pieces to cover the basic modulation needs of projects and in order to adapt its pieces to the design of the architecture.

Currently, we have various moulds and special pieces. The FAVETON R&D department collaborates in innovative projects, continually developing prototypes and new moulds.

PROPERTIES
RULE
FAVETON VALUES
Tolerances
ISO 10545-2
– Lenght (Extrusion Direction) +/- 1mm
– Height +/- 2mm
– Thickness +/- 10%
– Straigtness (Extruxion Direction) +/- 0,3% of lenght
– Rectangulatity +/- 1% of height
– Surface flatness of diagonal or height +/- 0,5%
Water absortion
ISO 10545-3
< 1% ó 3-6% depending on color
Bending strenght
ISO 10545-4
FVC 15-20N/mm² – FVB 14-18N/mm² depending on color
Linear thermal expansion
ISO 10545-8
Coefficient of expansion 5,7×10-6 (k-1). Test ITC
Resistance to thermal shock
ISO 10545-9
Unalterable up to 145ºC, according to test
Moisture expansion
ISO 10545-10
Mean value <0,1mm/m, Maximum value <0,1mm/m. Test ITC
Frost resistance
ISO 10545-12
Unalterable according to test (100 cycles +5ºC a -5ºC)
Chemical resistance
ISO 10545-13
Only applicable in corrosive conditions. At least G and B class
Stain resistance
ISO 10545-14
At least CLASS 3
Color differences
ISO 10545-16
Δ E< 2

 

 

Columna

COLUMNA · Alveolar extruded piece

U-shaped piece section.
Width: 200×200 mm.

 

CORONACIÓN · Extruded piece

L-shaped section with blunt corners.
Width: 320 mm.
Length: up to 1200 mm. Between axes.

ESQUINA • Extruded piece

Dimensions: 100X100 90 degrees / 200 × 200 90 degrees / 100X100 135 degrees
Triangular section section, angles 90 and 135 degrees
Width: 100×100 mm. And 200×200 mm.
Weight: 8.1 kg / ml.
Standard joint 3 mm. In horizontal and vertical.

Peldaño

 

PELDAÑO · Extruded piece

L-shaped section with blunt corners.
Width: 320 mm.
Length: up to 1200 mm. Between axes.