CERAMIC VENTILATED FAÇADE
Extruded ceramic tile, 28 mm thick, available in large formats and five heights. Its tongue-and-groove shape impedes the direct entrance of water to the chamber, thus improving the technical features of the building.
For the development of the façade with this type of pieces, 10 mm of horizontal joints and 3 at 10 mm of vertical joints will be considered, depending on the system used. With these pieces we can use the S.A.H., S.A.C., S.A.F., S.A.V., ventilated façade systems and the OMEGA strip system.
Faveton ACQUA was designed to be placed in a horizontal as well as vertical position. This flexibility in installation, along with its wavy texture, volume and a set of lights and shadows, makes the façade dynamic and, therefore, breaks the static nature of a traditional flat façade. These new pieces are compatible with the standard Faveton S.A.H. system, which means that the technical experience acquired with this system is totally applicable to these new pieces.
Tile 16 mm thick, reaches 1,200 mm in length. It combines design and lightness, in order to optimize and economize the use of the ceramics in the different types of façade. This piece is especially recommended for renovations.
For the development of a façade with this type of pieces 10 mm horizontal joints and 3 to 5 mm vertical ones are considered. With this piece we can use the S.A.C. Simple ventilated façade systems (aluminium and galvanized), S.A.F. and the non-ventilated strip system.
The lattices made from LOUVERS permit maintaining the aesthetic continuity of the ceramics in open areas, reducing sun exposure and views to the interior without the need for other devices. They permit the more intelligent use of light and, therefore, they favour criteria of sustainability and energy savings.
FAVETON offers a great variety of ceramic slats with a broad range of shapes. The four FAVETON slat times (briol, java, orona and spheric) are available in a length of up to 1.500 mm and are presented in natural colours.
The extrusion of ceramic pieces leads to obtaining singular designs of pieces. Faveton has a wide range of models and special pieces to cover the basic modulation needs of projects and in order to adapt its pieces to the design of the architecture. Currently, we have various moulds and special pieces. The FAVETON R&D department collaborates in innovative projects, continually developing prototypes and new moulds.
© 2013 Faveton - Ctra. Herrera de los Navarros, km. 1,5 | 50450 MUEL (Zaragoza) | Tel (+34) 976 140 311 |Fax (+34) 976 141 164