ACQUA

ACQUA Extruded tiles with symmetrical joint design that allows flexibility upon installation. Together with the possibility of wavy and flat exterior surfaces, this ceramic panel generates volume along with contrast of lights and shadows that give the facade a dynamic aspect. 

Geometry

ACQUA

Symmetrical joint design tile in 20 mm thickness

  • Standard heights: 200-300-400-500-600mm
  • Maximum length: 1500mm
  • Weight: 32 kgs/m2
  • Thickness: 20mm
  • Standard joints: 4mm horizontal and vertical

Options: available in different geometries, finishes and colors.

FAVETON FICHAS TECNICAS PRODUCTOS acqua-14

WAVY ACQUA

Symmetrical joint design tile in 20 mm thickness

  • Standard heights: 200-300-400-500mm
  • Maximum length: 1500mm
  • Weight: 32 kgs/m2
  • Thickness: 20mm
  • Standard joints: 4mm horizontal and vertical

Options: available in different geometries, finishes and colors.

Range of colours and finishes

  • Standard colours
  • Special colours
  •   colours

Anchorage systems

  • SAH: Horizontal Anchorage Systems
  • SAH: Vertical Anchorage Systems
  • SAC: Combined Anchorage System
  • SAC-O: Omega Combined Anchorage System
  • SAO: Omega Anchorage System

ACQUA PROPERTIES

PROPERTIES RULE FAVETON VALUES RECTIFIED FAVETON VALUES

Tolerances

ISO 10545-2

- Length (extrusion direction) +/- 1mm*
- Height +/- 2mm*
- Thickness +/- 10%*
- Straightness (extrusion direction) +/- 0.3% of the length
- Orthogonality +/- 1% of height
- Surface flatness of the diagonal or height +/- 0.5%

- Length (extrusion direction) +/- 1mm *
- Height +/- 1mm *
- Thickness +/- 10% *
- Straightness (extrusion direction) +/- 0.6mm in length
- Orthogonality +/- 1% of height
- Surface flatness of the diagonal or height +/- 0.5%

(*) According to format dimensions.

Water absorption

ISO 10545-3

<1% or 3-6% depending on colour

Flexural strength

ISO 10545-4

FVC 15-20 N / mm - FVB 14-18 N / mm depending on colour

Linear thermal expansion

ISO 10545-8
Expansion coefficient 5.7 × 10-6 (k-1). ITC test.
 
Heat shock resistance
ISO 10545-9
According to test up to 145 ° C unchanged
 
Moisture expansion
ISO 10545-10

Average value <0.1mm / m, maximum value <0.1mm / m. ITC test

Frost resistance
ISO 10545-12

Unalterable according to test (100 cycles + 5ºC to -5ºC)

Chemical resistance
ISO 10545-13
It only applies under corrosive conditions.
Minimum class G and B
 
Stain resistance
ISO 10545-14
Minimum CLASS 3
 
Colour differences
ISO 10545-16

Δ E< 2

Do you want to see how we work?

ACQUA Projects