LOUVERS

Sun protection with contemporary design

Louvers allow to maintain the aesthetic continuity of ceramic tiles in glazed areas, reducing insolation and allowing the increase of visual privacy for the said areas. Also, they allow a more intelligent use of light and therefore favors sustainability and energy saving criteria.

Geometry

Geometría

  • Maximum length: 1500 mm

(*) Dimensions in millimetres  |  (*)  Dimensiones en milímetros

LOUVERS MODULAR SYSTEM

Range of colours and finishes

Anchorage systems

Click on the buttons to download the plans of each anchorage system.

Click on the buttons to download the plans of each anchorage system.

Click on the buttons to download the plans of each anchorage system.

Click on the buttons to download the plans of each anchorage system.

Click on the buttons to download the plans of each anchorage system.

Click on the buttons to download the plans of each anchorage system.

LOUVERS PROPERTIES

PROPERTIES RULE FAVETON VALUES

Tolerances

ISO 10545-2

- Length (extrusion direction) +/- 1mm
- Height +/- 2mm
- Thickness +/- 10%
- Straightness (extrusion direction) +/- 0.3% of the length
- Orthogonality +/- 1% of height
- Surface flatness of the diagonal or height +/- 0.5%

Water absorption

ISO 10545-3

<1% or 3-6% depending on colour​

Flexural strength

ISO 10545-4

FVC 15-20N / mm² - FVB 14-18N / mm² according to colour​

Linear thermal expansion

ISO 10545-8
Expansion coefficient 5.7 × 10-6 (k-1). ITC test.
 
Heat shock resistance
ISO 10545-9
According to test up to 145 ° C unchanged
 
Moisture expansion
ISO 10545-10

Average value <0.1mm / m, maximum value <0.1mm / m. ITC test

Frost resistance
ISO 10545-12

Unalterable according to test (100 cycles + 5ºC to -5ºC)

Chemical resistance
ISO 10545-13
It only applies under corrosive conditions.
Minimum class G and B
 
Stain resistance
ISO 10545-14
Minimum CLASS 3
 
Colour​ differences
ISO 10545-16

Δ E< 2

Do you have any questions or want more information about LOUVERS?